The Avon EB750 Excel Barrier was developed in conjunction with the Avon EB450 Parking Barrier to provide a cost effective and reliable means of controlling wider road widths.

Designed and manufactured in our British Factory by Engineers with over 25 years experience in the development and production of Rising Arm Barriers, the Avon EB750 has become a leader within its field. With a full installation service and maintenance capability, we are able to provide a swift and efficient solution to all your security requirements.

	KEY FEATURES		BENEFITS
	100% Duty Cycling		Reliability
	Electro-Mechanical Drive Unit		Low Maintenance
	Fast Acting 4.2 secs		Service Spares Availability
	Multi Process Coating Specification		Manual Operation in Event of Power Failure
	Modular Design		Ease of Installation
	Winding Handle Facility
	230v Single Phase 50HZ, 5A Supply

The Avon EB750 Excel Electro Mechanical Barrier stands 1135mm above foundation level with the boom 840mm above foundation level. The arm is constructed from a rectangular section aluminium 76mm x 38mm, supplied white polyester powder coated with red fascal striping.

The heavy duty motor plate supports the 100% duty cycle permanent capacitor 4 pole T.E.F.C. motor which provides the power for the toothed belt driven industrial grade gearbox, which in turn drives the sinusoidal output mechanism.

Two heavy duty bearings are secured to the motor plate, which support the drive shaft, this having 2 nos machined cams to activate the adjustable limit switches to control the boom travel.

The barrier control panel is mounted within the barrier cabinet behind a removable/lockable panel and provides the necessary power supply isolator, fuses, thermal overload trips and motor contactors. Control voltage S.E.L.V 24v.

The hinged and lockable steel top cover provides easy access to the drive mechanism. The all steel constructed cabinet and cover are shot blasted to give a clean grease free surface providing maximum keying effect for the two pack high zinc primer, 40 microns, followed by a yellow (RAL 1007) textured polyester powder coated top coat, 40 microns - approx wt from 130kg.

For barriers with a boom length greater than 5m a straining wire is added for additional stability, along with an adjustable spring loaded end steady/pogo support to suit site conditions, recommended when equipment is added to the boom.

It is recommended that the barrier is secured to the foundations using 4 nos M12 x 160mm chemical anchors. The installation of ducts for cabling is dependant upon the control criteria.

CLICK HERE TO VIEW THE SCHEMATICS

The Avon Barrier Company reserve the right to change or amend the specification of its products from time to time in furtherance of its policy of continued improvements.

USE THE LINKS (LEFT) TO EXPLORE OUR SITE FURTHER
CLICK HERE IF NO LINKS SHOWING ON THE LEFT