Road Blockers | Security Road Blockers | RB700

Road Blockers Security Blocker
1 2 3 Road Blockers Security Blocker

Security Road Blocker Literature RB700

  Literature   

Security Road Blocker Drawings RB700

   Drawing  

Avon RB700 Roadblockers come in a variety of widths to suit specific site requirements, with a blocking segment heights of 700mm.

RB700 Road Blockers

The roadblockers are constructed from heavy welded steel section to provide sufficient strength to exceed British axle loads.

 

The road blockers heavy duty durbar top plate is coated with safety markings, with removable access covers to enable efficient installation and servicing.

Road blockers are operated by an hydraulic ram with the power unit (HPU) positioned locally within an externally rated cabinet. The road blockers mechanism is encased in a galvanised sheet steel enclosure and has access points for onward connection to ducting for hydraulic hoses and control cables.

On installation the roadblockers entire enclosure is encased by concrete with construction being subject to site ground conditions.RB700 Road Blockers

The power requirement for road blockers is dependent upon the duty cycling requirement, number and size of blockers to be driven by the power pack.

The road blocker comes with a push-button control as standard, however it can be customised to interface with a wide range of access control equipment to suit specific customer requirements (available as options) and any configuration including (but not limited to) inductive loop systems, card readers, communication equipment and manned guard emergency systems can be accommodated.

For safety reasons pedestrians, cyclists and motorcycles are advised not to use a blocker controlled roadway, additional safety measures can be incorporated into the road blocker system if required.

Where the Roadblocker control point is remote from the installation, we strongly recommend the fitting of a recordable CCTV system, traffic lights and safety inductive loop systems.

See our other Road Blockers including our PAS 68 Crash Tested Road Blockers:

Road Blockers RB680 Roadblockers | Security Roadblockers | RB680
RB780CR PAS 68 Road Blockers PAS 68 Road Blockers | RB780CR Chieftain Road Blockers
RB880CR PAS 68 Shallow Road Blockers PAS 68 Shallow Road Blockers | RB880CR Defender Road Blockers
RB980CR PAS68 Surface Roadblockers PAS 68 Surface Road Blockers | RB980CR Sabre Road Blockers

Key Features

  • Vandal Resistant
  • Complies with BS6571 Part 4
  • High Quality Coating System
  • Manual Hand Pump facility
  • 3 Phase 50 Hz supply 415V

Benefits

  • Reliability
  • Durability
  • Service Spares
  • Ease of Installation
  • Manual operation in the event of power failure

Options Available

  • Emergency Fast Rasie system
  • Emergency buttons with lock down
  • UPS backup for the electrical system
  • Accumulator systems for hydraulic operation in power fail conditions
  • Access control and Intercom systems
  • Inductive Loop Systems
  • Traffic Lights and back-indication system
  • Stop/No Entry/Warning Signage
  • Integral inset warning lights in blocking segment

View Road Blockers Drawings (DWG)

View Road Blockers Drawings (PDF)

View Road Blockers Literature (PDF)