High Impact High Security Sliding Gates

SG1100CR Armoured Vehicle Gate
1 2 3 4 5 6 7 8 SG1100CR Armoured Vehicle Gate

Yellow Stripe PAS 68 Gates

 Data Sheet  Drawing Download   PAS68 Gate Specification

Yellow Stripe PAS 68 Gates

Avon SG1100CR High Impact High Security Sliding Armoured Vehicle Gates provide a high level of security against unauthorised vehicle access.  

SG1100CR High Impact Security Sliding Armoured Vehicle Gates are designed to withstand substantial direct impact forces, high security sliding gates are used to protect sites from extreme aggressive attacks while maintaining a pedestrian secure environment.

Avon PAS 68 high security automatic sliding gates are manufactured by engineers with a wealth of experience in the fields of High Security and Access Control, the SG1100CR automatic high security sliding gates are a highly dependable security product.

Each automatic security gate incorporates the crash tested vehicle restraint system and enables a wide range of gate heights, clear widths and infill types to be provided. Foundation depths are from 500mm subject to gate design.

With an experienced system design capability along with a worldwide installation, service and maintenance capability, we are able to provide a swift and efficient solution to all your high security requirements.

SG1100CR High Impact   Crash Tested Sliding Gates

The High Impact Sliding Gate is constructed with a 3.8m opening using a cross beam of 256 x 90mm cross section.  The foundations comprise of a rebar cage set in concrete to a depth of 470mm.  Side Catcher assemblies are set within the rebar reinforcements with the hinged post is fixed to studs grouted into the concrete foundation.High Security Sliding Gates

Each SG1100CR High Security Sliding automatic gate comes with hold to run as standard, however it can be customised to interface with a wide range of access control equipment to suit specific customer requirements (available as options) and any configuration including (but not limited to) inductive loop systems, card readers, communication equipment and manned guard panic systems can be accommodated.

Where the High Impact Sliding Gate control point is remote from the installation, we strongly recommend the fitting of a recordable CCTV system, traffic lights and safety inductive loop systems.

Please note that a full site risk assessment must be carried out at design stage to ensure all relevant safety systems are included as this is a specialist high security product and is designed for use with vehicles only.

Please view our other PAS68 Crash Tested Security Products:

RB780CR Chieftain PAS 68 High Security Road Blockers
PAS68 Security Road Blockers
PAS 68 Crash Tested Shallow Road Blockers
PAS68 High Security Shallow Roadblockers
RB980 PAS68 Crash Tested Surface Road Blockers
PAS68 High Security Surface Road Blockers
EB950CR Crash Tested PAS 68 Security Barriers PAS68 High Security Barriers
GC1100CR PAS68 High Impact Hinged Security Gates PAS68 High Impact Hinged Security Gates
SB970CR Crash Tested PAS 68 Automatic Rising Bollards PAS68 High Security Bollards
SB970CR PAS 68 Static Security Bollards {Page-50}

Key Features

  • Physically impact tested to PAS 68
  • Manufactured from heavy gauge materials
  • Variable height and clear widths
  • Manual operating override facility
  • High quality coating system
  • Shallow mounting less than 500mm overall depth
  • Hold to run operation


  • Confidence in proven performance
  • Strength and durability
  • Flexibility to suit site requirements
  • Operational under power failure conditions
  • Overcomes site depth restrictions
  • Safe operation

Technical Specification

  • Standard gate height 2400mm - additional razor wire/cladding can be added for additional height
  • Standard sizes - clear width openings/gap of 5m, 6m and 7m
  • Bespoke sizes available on request, subject to conditions, contact our sales department for advice
  • Sliding gates power requirements: subject to gate size and construction
  • Full PAS 68 classification: V/7500(N2)/64/90:0.0
  • Model tested: sliding gate with clear opening gap of 7.0m and an overall height of 2.4m + 100mm sacrifical topping, foundation depth of 0.47m
  • Operating temperature range available -25 deg C - +70 deg C
  • Sliding gates construction: the framework is constructed from fully welded, heavy gauge, steel angle and box section and hi-tensile structural steel.

Options Available

  • Emergency buttons with lock down
  • UPS backup for the electrical system
  • Safety beams
  • Safety edges
  • Laser scanners
  • Serrated / barbed wire toppings
  • Matching infill panels
  • Inductive loop systems
  • Traffic lights and back-indication system

View Gates Drawings (DWG)

View Gates Drawings (PDF)

View Gates Literature (PDF)

View High Security Crash Test Videos (FLV)

View Product Procurement Specifications